Tệp mô hình được tải xuống trên MyMiniFactory bằng tài khoản của bạn — đó là cách danh mục của họ hoạt động. Hãy tải xuống và đính kèm vào đơn hàng: xưởng sẽ in và báo giá.
- Kích thước
- 143.43mm x 89.6mm
- Lượng vật liệu
- 111.32mL or 122.4g
Giấy phép của tác giả: Creative Commons - Attribution - ShareAlike
Mô tả của tác giả
I was searching around for bases and couldn't find anything that was thick enough for my liking, so I did some messing around in OpenSCAD with some help from Isaac Howard's OpenSCAD files over on Printables (https://www.printables.com/@IsaacHoward) and got these boys. Supports are done by hand and worked for me in lower temperatures, so I expect they will work for most everyone. I have the following bases included: 25mm (supported and lychee) 28.5mm (supported and lychee) 32mm (supported and lychee) 40mm (supported and lychee) 50mm (unsupported, will do if I need it or requested) 60mm (unsupported, will do if I need it or requested) I have included the preplate that I used for the 40 bases shown. It has 10x 40mm, 9x 32mm, 9x 28.5mm, 12x 25mm. Please let me know if you have any issues or if these files were helpful for you. If you want to make adjustments on your own, you can check out Isaac Howard's OpenSCAD files and adjust to your liking. My files are honestly too close to his for me to be comfortable sharing them unattributed, so give him some love. Enjoy :D
Cách in
Elegoo Mars 3 Pro Chitubox Slicer (see preplate file) Elegoo Standard Resin Ambient temperature 15-18 Celcius Resin not heated (~20C to start) 3.2s exposure 35s base layers 6mm lift distance 70mm/min lift speed 0.05mm layer height 210mm/min retract speed