Tệp mô hình được tải xuống trên MyMiniFactory bằng tài khoản của bạn — đó là cách danh mục của họ hoạt động. Hãy tải xuống và đính kèm vào đơn hàng: xưởng sẽ in và báo giá.
- Kích thước
- 13.9cm x 10.5cm x 1.3cm
- Danh mục
- Tabletop
Tác giả chỉ cho phép in mô hình này để sử dụng cá nhân: không được bán bản in. Xưởng sẽ in riêng cho bạn.
Giấy phép của tác giả: MyMiniFactory Digital File Store License
Mô tả của tác giả
A simple ring box I designed a while back, with two hinges. You can line the ring cutout and the upper lid with some cushioning if you want to spruce it up; and the outside of the box has been left intentionally blank so you can opt to either customize it yourself, or laser engrave it after the fact. (Ignore the black 'grime' on the surface, that's just print bed adhesive from my test print). Dimensions:Ring box (closed): 9.9cm x 6.9cm x 1.9cmRing cutout: 2.8cm x 2.8cm x 0.9cm (+ 0.9cm above in hollow lid) 10% infill should be fine. Test print pictured was done in Translucent Red PLA @15% infill. Might want a lot of shells so that the hinges have some good structure to them. You'll need supports for the hinges; and be careful with them. You might have to work the hinges a bit in order to get the pins inserted and spinning freely
Cách in
10% infill should be fine. Test print pictured was done in Translucent Red PLA @15% infill. Might want a lot of shells so that the hinges have some good structure to them. You'll need supports for the hinges; and be careful with them. You might have to work the hinges a bit in order to get the pins inserted and spinning freely