O arquivo do modelo é baixado no MyMiniFactory com a sua conta — é assim que o catálogo deles funciona. Baixe-o e anexe ao seu pedido: o estúdio vai imprimir e informar o preço.
O criador permite imprimir este modelo somente para uso pessoal: as impressões não podem ser vendidas. O estúdio vai imprimi-lo para você, pessoalmente.
Licença do criador: Creative Commons - Attribution - Noncommercial - ShareAlike
Descrição do criador
Update 06/05/24: Uploaded a new version of the screw, it's the right way around now. Thanks so much to lief92 for pointing this out. :) As predicted, somebody has created a thin fighting board / fight box using my recently released thin arcade buttons... It's me. Yep, surprising nobody, here it is. At only 18mm thick, I think that I could only make it thinner if I used a pcb with surface mount switches or maybe a wafer-thin keyboard membrane but tactile feedback would be limited, like an old ZX Spectrum. Anyway, 17 tiny micro switches required for the 17 buttons. I would recommend a RP2040 (zero preferable) as an encoder. Here is a link to the code to drag and drop onto it : https://github.com/OpenStickCommunity/GP2040-CE I have included the two push buttons from my last release to save time. Print the push button parts upside down and use a brim, especially when printing multiples. Make sure the micro switches are oriented to have the tiny push button in the centre of the casing. I do prefer the feel of the standard arcade micro switches with their longer distance to a bigger click but these have their place, if you can get used to the near instant (mouse button like) tiny click, then I guess the reward is a quicker action. Aliexpress link to micro switches : https://www.aliexpress.com/item/1005005596552328.html Best of luck dancing the light finger-tango across this 3DP stage. --PATREON & PATREON SHOP.--https://www.patreon.com/3DFreeman Thanks for your continued support!