MyRCCar MTC Chassis Total Combo. Rigid Axles, Independent Suspension and many extras

Creator's description

My Store is Closed. Design not on sale here. Do not buy if you are allowed.   This is my most complete recopilation of parts about MTC (Monster Truck / Crawler) chassis ever. More than 200 parts to combine and build the truck chassis you are looking for. I have invested quite a bunch of money and hundreds of hours designing, printing and testing these MTC chassis and now all those parts and related ones are bundled in this TOTAL COMBO ;) Both Versions:You will find here both of MTC versions, the "RA" (Rigid Axles), and "ISS" (Independent Suspension System) ones.This means you can build a Crawler with Rigid Axles, a Monster with the ISS version or an "hybrid" using Independent Suspension System for the Front Axle and a Rear Rigid Axle.There are a few parts, specially the sides bar structure and the central platform and gearbox, which are common to both versions. Updated Parts:I have reviewed and improved many of the parts from the begining of this project. You will find the latest versions of each one, the same than the "older" ones if they provide a different approach to the problem. The Gearbox:You will be able to use a sourced real center differential without reduction and add the "reduction system" if needed.The same way you can use a 3D printed fixed Center Crown instead of the DifferentialYou can use different gears in the "reduction system" to achieve different reduction ratios, up to 1/4. You could use this feature to better "tune" the max speed and max torque of your build. Using Universal Shafts for central transmission:If you want to use sourced HSP 18027 or similar central transmissions you will be able to use them for a crawler build (without center differential, fixed crown instead) using the Rigid Axles Version. I have not tested if it would work in the ISS version. For this purpose, you can use the 3D printed crown and axle provided to be used as "central fixed diff" but you will need a piece of 5mm metal rod to insert it inside the "differential". You will have to "metal-smith" this little metal axle to be able to use it with your sourced transmission. A strong screw inside the printed diff will fix it to the diff so they move as one. New Universal Body Holder System:My new system allows you to use the classical "body clip" or "magnet" system, regulate the height but also displace the front or rear holders to the front or back of the car.As you probably know, I really like TPU material. It is the cheap one from the elastic filaments, and it isn't as hard to print as a TPE or lower shore filaments. The main part of each Body Holder (the front and the rear one) must be made of TPU and I think its shape will really help surviving some hits without breaking something.Two pairs of PLA or other rigid filament Posts will "screw" in F/R TPU Main Parts. Screw them less or more, use shorter or longer posts version to achieve your desired height. In each Body Holder Post top part, a small TPU part with a M3x12 screw as axle will serve as a b