模型檔案需使用您的帳戶在 MyMiniFactory 上下載——這是其目錄的規則。下載後附加到訂單：工作室會列印並給出報價。
- 尺寸
- 104mm x 70mm x 20mm
- 材料用量
- 44g
作者許可：Creative Commons - Public Domain
作者描述
Welcome to my design!This is a massive phone / tablet holder, witch has freely adjustable angle from 95° to 175°. It has nice, elegant design, and it is pretty compact, as You can see in the pictures. Compatible with phones / tablets thinner than 12.5 mm.The mechanism of the phone holder is based on tight tolerances.You can print it without any supports. For printing I recommend to use PLA, or some other stiff material. When printed out, for assembly You need a press or rubber mallet / a small hammer, and You have to press the three parts together, as You can see in the pictures. For more informations see the printing details.I hope You enjoy my design :)
列印說明
This phone / tablet holder is printable without supports.For printing use PLA.I recommend You to use 3 perimeters.Recommended layer hight is 0.2mm, but You can also use finer settings.Recommended infill is 20-30%.For one stand You have to print these files:holder_leg_1.stlholder_leg_2_pl.stl OR holder_leg_clean.stlstand.stl