모델 파일은 MyMiniFactory에서 내 계정으로 다운로드해요. 그쪽 카탈로그 방식이에요. 다운로드해 주문에 첨부하면 스튜디오가 출력하고 가격을 알려 드려요.
작가가 개인용 출력만 허용했어요. 출력물을 판매할 수 없어요. 스튜디오가 개인 용도로 출력해 드려요.
작가 라이선스: Download - Share - Maintain License - Credit - Remix - Noncommercial
작가 설명
Nautilus gears based on logarithmic spirals. The gear profiles were generated using this Maple script for which full credit goes to the original author:http://www.maplesoft.com/applications/view.aspx?SID=95483&view=html&L=G Rendered animation of the gears: http://www.youtube.com/watch?v=dtkEyZwuwH4 I'm not going to upload the SolidWorks file because it is frankly a mess of different experimentation, but I uploaded the DXF which should be easy enough to modify with most CAD software. <b> Update: No more breaking pins! </b> I've replaced the pins with a simple press fit design. Print two of the Connector Bar v2 or the Curved Connector Bar v2 (same idea, just curved for aesthetics) and snap them together! On a well calibrated printer they should snap together easily and hold tightly with friction. If they aren't sticking together just add a drop of glue! Warning, these bars are one time use, they will be very hard to pull apart without breaking the pin. I will keep the original bars on for reference.
출력 방법
Print two gears and two connector bars. Place the gears onto a connector bar, make sure the gears align as in the pictures, snap in the second bar and enjoy.