모델 파일은 MyMiniFactory에서 내 계정으로 다운로드해요. 그쪽 카탈로그 방식이에요. 다운로드해 주문에 첨부하면 스튜디오가 출력하고 가격을 알려 드려요.
작가가 개인용 출력만 허용했어요. 출력물을 판매할 수 없어요. 스튜디오가 개인 용도로 출력해 드려요.
작가 라이선스: Download - Share - Maintain License - Credit - Remix - Noncommercial
작가 설명
This fidget keyring is a simple design using a 3 gear chain to do nothing but entertain its user. Turn the small gear and watch the other gears turn! Requires 3x 10-12mm m3 bolts and 3x m3 nuts. Revised Base & Top - moved both 30T Gears 0.5mm further from the 15T gear for easier spin. Revised both gears - bored to 5.5mm for extra clearance / easier spin.
출력 방법
I've printed this on 0.15mm layer height using ABS on an UP! Plus 1.0.25 layers would work well as a lot of the clearances are 0.5mm. Press the nuts into their holes using plyers. I had to shave some excess ABS from the axels with a scalpel form where the layers met printing the circles in order to allow for an easier spin of the gears.